OEM Food Grade 25 35mm Apv Pump Seal Unbalanced Single Spring

All range of shaft seals for APV pumps and mixer (A.P.V WORLD PUMPS)

1, Type 16 Single Seals to Suit APV® W PUMPS

WISH BRAND Provide 25mm and 35mm Seals to suit A.P.V. World Series Pumps, with standard single Seals, For Pumps with flushed Seal chambers and Double Seals, please contact us.

2, Type 16 DOUBLE Seals to Suit APV® W PUMPS

WISH BRAND Provide 25mm and 35mm Double Seals to suit A.P.V. World Series Pumps, with flushed Seal chambers and Double Seals installed. You can contact us with the O.E.M details for Cross-Reference identification, should you require.

3, Type 16 PLUS Seals to Suit APV® W+ PUMPS

WISH BRAND provide 25mm and 35mm face sets and face-holding kits to suit A.P.V. W+ series pumps.

The Type 16.PLUS face sets include a Silicon Carbide “short” rotary face, a Carbon or Silicon Carbide “long” stationary (with four drive slots), two ‘O’-Rings and one drive pin, to drive the rotary face. The static coil unit, with P.T.F.E. sleeve, is available as a separate part.

The Type 16.PLUS.KIT, in both 25mm and 35mm sizes, is also available in FDA grade materials as standard.

4, Type 29 to Suit ZM-® SerieS PUMPS

WISH BRAND provide 20mm,25mm and 30mm seals to suit former “Pasilac Rosista®” brand ZM® series pumps. The Type 29 design features the enhanced sealing benefits of a boot mounted seat, to the same dimensions as the O.E.M. metal to metal design.

ZMA, ZMB, ZMH1 ,ZMH2, ZMK1, ZMK2, ZMS3, ZMS4, ZMH4, ZMK3, ZMD

5, Type 66 to Suit APV® AGITATORS

WISH BRAND provide a 1.000” Type 66 rubber-encased seal to suit A.P.V.® agitators, available as rotary part only, or as a complete seal with a Type 20 stationary. For further sizes, please contact us with your requirements.

6, Type 297 to Suit A.P.V.® DW® lobe rotor pumps

WISH BRAND provide replacement seal face kits, complete with ‘O’-Rings, to suit A.P.V.® DW® series lobe rotor pumps. DW1,DW2,DW3,DW4 .

Available with Silicon Carbide rotary face (short face) and Silicon Carbide stationary face (long face). For further sizes or for double seal arrangements, please contact us.

7, Type 26 series for A.P.V.® Puma® Pumps

WISH BRAND provide the entire range of seals and associated components commonly found on 1.000’’ and 1.500’’ shaft A.P.V. Puma® Pumps, in single or double seal configurations.

All range of shaft seals for APV pumps and mixer (A.P.V WORLD PUMPS)

PUMA+ Series Centrifugal Pumps, Rotary Lobe Pumps - DW Pumps, (DW1-5, DW6-7, Sanitary Rotary

Pumps R-Series, V² Series Centrifugal Pumps, W+ Series Centrifugal Pumps (IEC), W+ Series

Centrifugal Pumps (NEMA), Wa+ Aseptic Pumps, Whp+ High Pressure Pumps, Wi+ Inducer Pumps, Ws+

Self-Priming Pumps (IEC), Ws+ Self-Priming Pumps (NEMA).

APV Cavitator, DarMix+ In-Line Mixer, Flex-Mix Instant Mixer, Flex-Mix Liquiverter, Flex-Mix

Power, Flex-Mix Processor,T PM Batch Powder Mixer, TPX Static In-Line Mixer.

We are a manufacturer. All seals have bulk inventory and can be shipped to you quickly. We promise to ship you in small quantities within 3 days.Advanced technology, excellence, replace original

1. Different models of mechanicals seals for a wide variety of Grundfos® pumps, among them: CR(N), NB, NK, CLM, LP, TP, etc. Available in diverse combinations of materials and different diameters: 12, 16, 22, 28, 33, etc. Also mechanical seals for Sarlin®. Division of waster pumps. Available in various materials: silicon-graphite carbide, silicon carbide-silicon carbide; combined with EPDM and FKM elastomers.

2. Mechanical seals are available for different references Gorman-Rupp® pumps. Special models for the transfer of clean water, sewage, oil industry, agriculture and others.
GRN-38'1

3. Mechanical seals for Fristam® pumps. Wide range of models and materials in the most standard diameters: 22,30 and 35 mm. Different assembly possibilities for the most well-known pump models: FP, FL and FT.

4. Mechanical seals for Fristam® pumps. Wide range of models and materials in the most standard diameters: 22,30 and 35 mm. Different assembly possibilities for the most well-known pump models: FP, FL and FT.

5. Broad range of mechanical seals compatible with Flygt® and Grindex® waste water pumps. These mechanical seals are characterized by their easy and fast installation, without having to make any modification to the pump. Manufactured in stainless steel and in solid tungsten carbide. Special tools are not necessary for their installation.

6. Mechanical seals for EMU® pumps. They get two static faces and one rotating face. We can supply the complete seal or spare faces.

7. Different designs of mechanical seals for Ebara® pumps, single and double seals in combinations carbide-silicon carbide and graphite-aluminium oxide.

8. Mechanical seals for all types of Calpeda® pumps: centrifugal pumps, multistage, submersible. Different models of mechanical seals in a wide range of materials.

9. Mechanical seals compatible for APV® pumps, among them: Puma, ZMA, ZMB, ZMD, ZMS, ZMH, ZMK. Rosista® and Pasilac®, W and W+. Some designs with wave spring like the special seals for APV Howard® pumps and Crepaco Clean Line®. All of them have been manufactured in materials suitable for working with fluids such as juices, milk and drinks in general.

10. Allweiler, Simple design of mechanical seals simple but with special measures for this type of pump.

11. Different models of mechanical seals compatible for Alfa-Laval® pumps series CM, FM, MR, LKH,GM and ALC. Also the models for the range of lobular SSP and SR pumps. Mechanical seals in different combination of materials tungsten carbide, silicon carbide, graphite; combined with different types of elastomers: NBR, EPDM and FKM.

12. Mechanical seals for ABS® submergible pumps specific wastewater treatment. Different models of mechanical seal available: oil chamber mechanical seal and water mechanical seal.

Fixing and Applying Directions of Mechanical Seals

1) Select Appropriate mechanical seal to match the materials according to work conditions and host machine equipment.
2) The radial acting deviation for the shaft(shaft sleeve) of the installed mechanical seal shall be 0.04mm by maximum
while the axial movement value of the rotor shall be no more than 0.1mm.
3) The seal cover (or shaft cover) of the stationary ring of the installed mechanical seals,the vertical degree of the seal
face should be 0.04mm by maximum.
4) When installing the mechanical seals,the shaft(shaft sleeve),seal chamber,seal face as well as the mechanical seal
must be cleaned in order to keep from any medium to sealing part.
5) When conveying medium of over high or low temperature,with medium which are easy catch fire,easy for explosion.
Related mechanical seal standards must be referred to take appropriate measures such as quench,rinsing,coolong and
filtrating.
6) Appropricate lubrication must be choosen when mechanical seal is installed.The installment size of the mechanical
seal must be guaranteed to the installment instruction.
7) Before the machine starts running,the hermetic compartment shall be full of medium and well lubricated.Dry friction
which may lead to the damage of the air-tightness is strict forbidden.